Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Studio City, CA
Chimney repair in Studio City usually costs between $400 and $3,200 depending on what’s wrong, and most jobs start with a camera inspection that costs around $249 to $425. Mantel Chimney Sweep has served Studio City since 2018, and we handle everything from cracked crowns to full liner replacements in the mid-century homes and hillside builds that dominate the 91604 and 91614 zip codes. If you’re seeing water stains near the fireplace or hearing birds inside the flue, call (844) 821-5749 and we’ll tell you exactly what’s going on.
Why Studio City Homes Are Different
Studio City’s housing stock splits between 1940s and 50s ranch homes south of Ventura Boulevard and newer, larger rebuilds up in the Fryman Canyon and Laurel Canyon-adjacent hills. The older homes almost always have original masonry fireplaces, and a lot of those flues were built without clay liners or with liners that have since cracked. Add in the Santa Ana winds that hit the canyon-facing exterior chimneys and you get a pattern we see every week: wind-driven debris, chipped mortar joints, and creosote deposits that have glazed hard from the mix of eucalyptus and oak firewood people burn on cool evenings.
The bigger issue in Studio City is fire season. Red-flag weather turns a chimney into a potential ignition point, and a flue fire that starts inside the chimney can send embers out an uncapped top and into dry chaparral. That’s why spark arrestor installation and creosote maintenance matter here more than in flat, wetter parts of Los Angeles. Homes in the Santa Monica Mountains foothills sit elevated with tall exterior chimneys, and earthquake-era hairline cracks in those masonry stacks let heat and gases escape where they shouldn’t.
Styles & brands we work with
Our Main Studio City Services
Most Studio City homeowners call us first about chimney sweeping, and second about dryer vent cleaning. Both are fire-prevention services, and both are jobs where a quick inspection turns up problems a general handyman misses.
Chimney Sweep in Studio City
Chimney sweeping in Studio City is less about winter heating and more about keeping the flue clean enough that it can’t ignite during fire season. We remove creosote and soot, clear out bird nests and eucalyptus twigs that wind pushes into uncapped chimneys, and check the spark arrestor before Santa Ana season starts. Hillside homes off Fryman Canyon Road often need taller ladder work than the flat lots south of Ventura. See the full breakdown on our Chimney Sweep in Studio City page.
Dryer Vent Cleaning in Studio City
Dryer vent cleaning is the second most common fire hazard we address in Studio City, and the canyon homes are no exception to the rule. Lint builds up inside the vent run, the dryer works harder, and eventually the lint ignites. We clear the full run from dryer to exterior, check the termination flap, and confirm the vent pipe is routed correctly. For the full scope of that service, read Dryer Vent Cleaning in Studio City.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Studio City
Chimney repair in Studio City is the core of what Mantel does here, because most of the fireplace problems we find are structural, not just dirty. The 1940s and 50s originals south of Ventura Boulevard were built with flues that were undersized for modern use, and many were never lined at all. When a flue has no liner or a cracked liner, heat passes into the surrounding masonry and can start a fire inside the wall before you ever see smoke in the living room. We repair what other companies can only report, and we do it with materials built for the trade, not a big-box patch. Our Chimney Repair hub covers the full scope, but below is what Studio City homeowners ask about most.
Chimney Cap Installation
Signs you need it
You hear birds or scratching inside the chimney, find nesting material on top of the firebox, or see rust flakes around the flue opening during rain.
What it costs in Studio City
Chimney cap installation in Studio City typically runs $380 to $520 for a standard stainless cap with spark arrestor mesh.
How we do it
We measure the flue opening, mount a correctly sized cap with mechanical fasteners or masonry anchors, seal the attachment points, and confirm the spark arrestor mesh is intact.
Chimney Liner Installation
Signs you need it
You see flaking clay tile fragments in the firebox, notice white staining or efflorescence on the exterior chimney, or a camera inspection from us shows a cracked or missing liner.
What it costs in Studio City
Chimney liner installation in Studio City ranges from $3,000 to $7,200 depending on flue height and liner type, with most hillside homes on the higher end due to taller exterior chimneys.
How we do it
We run our camera up the flue to document the damage, remove or prep the old liner, install a DuraFlex stainless steel liner sized to the appliance and flue dimensions, and connect the crown plate and cap.
What Chimney Repair Costs in Studio City
| Item | Typical range in Studio City |
|---|---|
| Chimney cap installation | $380 – $520 |
| Crown repair or rebuild | $800 – $1,500 |
| Flashing repair | $400 – $900 |
| Liner installation | $3,000 – $7,200 |
Hillside homes with tall exterior chimneys push costs up because access is harder and flue runs are longer. Homes south of Ventura with one-story ranches usually land at the lower end.
Do I really need a new chimney liner, or can I wait?
If the liner is cracked, you shouldn’t wait, because heat and gases are already escaping into the masonry. A camera inspection gives you the proof, and we don’t recommend a liner replacement without showing you the footage. Call (844) 821-5749 and we’ll tell you plainly whether it can wait or must be done now.
Can you match the chimney materials on my 1950s Studio City home?
Yes. For masonry repairs we match the existing brick and mortar color as closely as possible, and for liner work we use DuraFlex stainless components that sit hidden inside the flue. The exterior look stays true to the original mid-century build. Call us for an exact quote.
Brands We Service in Studio City
We work with a curated set of professional chimney-industry brands, including HeatShield, Gelco, and Olympia Chimney. Having these materials dialed in means we don’t have to order and wait when a Studio City job turns up a cracked flue. Read more about the full lineup on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Studio City, CA
| Service | Typical range in Studio City |
|---|---|
| Chimney sweep | $175 – $275 |
| Chimney inspection with camera | $249 – $425 |
| Dryer vent cleaning | $120 – $225 |
| Chimney cap installation | $380 – $520 |
| Chimney crown repair | $800 – $1,500 |
| Chimney flashing repair | $400 – $900 |
| Chimney liner installation | $3,000 – $7,200 |
| Fireplace damper replacement | $300 – $600 |
| Smoke chamber repair | $1,200 – $2,400 |
| Dryer vent repair or reroute | $250 – $550 |
What pushes prices up in Studio City is chimney height and access. Hillside homes off Fryman Canyon and Laurel Canyon roads regularly require scaffolding or extension ladder setups that add labor hours. We give you a fixed price before work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Studio City
We cover all of Studio City, from the flat streets south of Ventura Boulevard up into the canyon-adjacent hills. Typical response is within a day or two for scheduling, and we route Studio City jobs from our nearest crew to keep travel time from inflating your quote.
- Fryman Canyon area
- Laurel Canyon-adjacent hills
- South of Ventura Boulevard
- Carpenter Square
- Silver Triangle
Service Area – Cities Near Studio City
Mantel Chimney Sweep also serves the communities around Studio City, including North Hollywood, CA, Universal City, CA, Sherman Oaks, CA, and West Hollywood, CA. If you’re just over the line from Studio City, call us and we’ll confirm coverage for your street.
Serving Studio City, CA — Our Local Coverage Area
We’re based in the Studio City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Studio City
During high fire-risk periods, we prioritize chimney sweeping and cap-installation calls in the Studio City hills, especially homes near canyon chaparral. Most customers can be scheduled within a day or two, and we recommend booking before the Santa Ana warnings start rather than after. Call (844) 821-5749 to lock in a date.
Some hillside and canyon HOA communities in Studio City require written approval for exterior work like cap installation or crown repair, especially when scaffolding is visible. We can provide a scope of work and a materials list to support your HOA application, and we’ll work around the approval timeline once it’s granted.
Yes. If you need a chimney sweep and a dryer vent cleaning, we can bundle both into the same Studio City visit and give you one fixed price up front. That’s the “from flue to dryer vent” call a lot of homeowners make before fire season starts. Call (844) 821-5749 to schedule both.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Studio City Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Tiana Robinson"Got a text with the technician's name and photo before he arrived. Small thing, but as a woman home alone during the day I actually really appreciated it."
— Yolanda Reyes"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Beatriz Torres