Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Los Angeles
Dryer vent cleaning in Los Angeles typically costs $129 – $249 for a single-family home, with most jobs completed in under two hours. Our crews work the full span of the city, from the 1920s bungalow tracts around 90004 and 90005 to the mid-century stucco apartment buildings in 90008. Clogged dryer vents are one of the leading causes of residential fires, and LA’s housing stock makes the problem worse than most homeowners realize. Call (844) 821-5749 and we’ll get your vent cleared before the next load goes in.
Why Mantel Chimney Sweep Is Los Angeles’s Preferred Dryer Vent Cleaning Company
We’re not a general handyman service that added vent cleaning as a side gig. Mantel Chimney Sweep is built around the chimney and hearth ecosystem, and that matters in Los Angeles because thousands of dryers here vent into flues that were never designed for lint exhaust. Our Dryer Vent Cleaning team understands what happens when lint accumulates in a brick chimney versus a proper metal duct, and we’re equipped to handle both.
Roland Vega leads our crews, and he’s spent years working through the specific failure patterns of LA’s older homes. That means when we arrive at a 1923 bungalow off Westmoreland Avenue or a 1980s tract house in 90008, we already know what to look for. Los Angeles homeowners call us because we don’t just clear the vent and leave. We camera-inspect the stack, document what we find, and give you a straight answer about whether the vent is actually safe to keep using.
We serve Los Angeles with the same repair-grade standards we bring to chimney work. No upsells, no fake urgency. Just a clear picture of the vent, what’s blocking it, and what it needs to run safely.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Los Angeles
Dryer Vent Cleaning
A standard dryer vent cleaning in Los Angeles runs $129 – $249 depending on run length and access. We use rotary brushes and HEPA-filtered vacuum systems, not the cheap plastic brush kits that leave half the lint behind. In LA’s older homes, we always confirm the vent actually terminates where you think it does before running the brush. More than a few bungalow owners have discovered their dryer was dumping lint straight into an unlined chimney stack.
Level 2 Inspection
A Level 2 inspection uses a video camera to assess the full interior of the vent or flue, including any mortar joints, offsets, or blockages that can’t be seen from either end. In Los Angeles, we recommend this whenever a dryer vents into an original brick chimney or an older clay-tile flue. If you haven’t had the vent looked at in years, a Level 2 inspection tells you whether a cleaning is even safe to perform.
Chimney Camera Inspection
Camera inspection is standard practice on our Los Angeles jobs, not an add-on. We run the camera before and after every cleaning. When we find cracked mortar, spalling clay tiles, or fibers that shouldn’t be in the stack, we show you the footage on-screen. Nothing gets recommended that you can’t see for yourself. That’s how we handle the old unlined chimneys common in 90004 through 90008, and it’s the only honest way to quote a repair.
Dryer Vent Rerouting for Unlined Chimneys
If your dryer vents into an unlined brick chimney, cleaning alone won’t solve the underlying problem. Lint traps moisture, moisture attacks mortar, and eventually the stack becomes a fire hazard that can’t be brushed away. We assess whether the vent can be rerouted through a proper metal duct, and if the chimney itself is worth saving, we discuss liner options. In LA’s bungalow stock, this is a routine part of the job, not an edge case.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Los Angeles
We stock materials from Famco, Copperfield, and HeatShield on our service vehicles, which means we can start repairs the day we diagnose the problem. Los Angeles homeowners don’t have to wait a week for a part to ship from a warehouse. When a dryer vent feeding into an old chimney needs a liner before it can be safely restored, we carry HeatShield cerfractory sealant and the connector hardware to handle it. The right materials, installed right. That’s the standard, whether we’re clearing a vent in Echo Park or restoring a chimney in Silver Lake.
Common Dryer Vent Cleaning Problems We See in Los Angeles Homes
- Dryers venting into unlined brick chimneys. This is the single most common LA-specific failure we see. Homes built before 1960 often have no metal duct at all. The dryer hose pushes air into a masonry stack, and lint accumulates inside the flue where it can’t be vacuumed out through the normal route.
- Palm frond and bird debris inside the stack. In neighborhoods with mature palm trees, fronds slide into chimney caps and block the flue. Add dryer lint to that mix and you get a dense, fibrous plug that hardens over time. We never run high-pressure air through a flue like this without first confirming the masonry is sound.
- Clay-tile flues with spalling or cracked mortar crowns. LA’s older clay liners crack with age and thermal cycling. A standard cleaning can further damage a compromised liner. That’s why we camera-inspect before we brush on any home built before 1990.
- Flexible foil transition hoses that have sagged or disconnected. In cramped LA laundry closets and garages, the transition hose gets pinched, kinked, or pulled loose from the wall connection. We check the full run, not just the part you can see behind the dryer.
Pricing for Dryer Vent Cleaning in Los Angeles, CA
A routine single-family dryer vent cleaning in Los Angeles typically runs $129 – $249. Apartment and condo cleanings, where access requires working through tight garage or utility closets, generally fall between $149 – $279. If the vent runs 20 feet or more, or if it connects to a chimney flue that needs a camera inspection first, you’re looking at $229 – $349 for the full job. Rerouting a dryer vent out of an unlined chimney starts around $400, and liner work through HeatShield adds cost depending on flue dimensions and access. Every quote is free and we show you the camera footage before any repair recommendation. Call (844) 821-5749 for an exact number.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Los Angeles
Our crews work throughout central Los Angeles and the surrounding neighborhoods. If you’re in Koreatown, Echo Park, Silver Lake, or Hollywood, we’re already in your area on most days of the week. The same camera-first, repair-grade standard applies no matter which side of the 101 you’re on.
Serving Los Angeles, CA — Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Los Angeles
If the dryer is venting into an original brick chimney with no flue liner, a standard cleaning is not safe or effective. We’ll run a camera inspection first to document what’s inside the stack. On a 1923 bungalow off Westmoreland Avenue, our tech found the dryer venting straight into the original brick chimney with no liner at all. Lint had mixed with palm frond debris to choke the smoke chamber. We showed the homeowner the cracked mortar joints on-screen and installed a HeatShield liner before restoring the vent. The cost for that kind of job depends on flue height and access, but nothing gets recommended without the footage to back it up. Call (844) 821-5749 and we’ll walk you through what to expect.
Because many LA homes route dryer exhaust into masonry chimneys that were built for wood smoke, not lint-laden air. Lint clings to rough brick, absorbs moisture, and accelerates mortar deterioration. If the flue has no clay liner or the liner is cracked, cleaning alone leaves you with a stack that’s still a fire risk. We repair what others can only report, which means if the camera shows a damaged or unlined flue, we’ll quote the liner work as part of the same visit rather than cleaning it and hoping for the best.
Every 12 months if you run the dryer regularly. In 1980s tract construction, the vent runs are typically shorter and made of rigid metal, but they still accumulate lint at the exhaust hood and at any elbows. If you notice the dryer taking longer to finish a load or the laundry room feeling humid, clean it sooner. Annual service is cheap insurance against a duct fire that starts in lint you can’t see.
Yes, especially in neighborhoods with mature Washingtonia palms. Fronds slide into uncapped or poorly fitted chimney caps and vent terminations, where they catch lint and create a plug that a normal vacuum can’t dislodge. We remove the debris by hand when possible and camera-verify the full run afterward. Never use high-pressure air on a blocked vent without first confirming the duct and any masonry are in good condition. Palm fronds plus lint make a dense, stubborn blockage that requires real removal, not just airflow.
First-degree creosote is a dry, powdery combustion byproduct that forms in wood-burning chimneys. Lint is an accumulation of cotton, polyester, and fabric fibers from your dryer. Both are flammable, but they behave differently. Lint catches fire easily at lower temperatures and burns fast because it’s full of fine, oxygen-rich fibers. Creosote, especially second- and third-degree buildup, can ignite at higher temperatures and burn longer. In LA homes where a dryer vents into a chimney, we often find both materials in the same flue. That’s a combination worth taking seriously. Call (844) 821-5749 and we’ll inspect and clean it properly.
One Local Insight From Our Work in Los Angeles
In Los Angeles, thousands of dryers vent into old brick chimneys or clay-tile flues that were never designed for lint exhaust. A routine dryer vent cleaning in this city often turns into a Level 2 inspection of an unlined stack with no liner at all. That’s not upselling. It’s the reality of working in a housing stock that predates modern mechanical venting codes by half a century. If your home was built before 1960, the odds that your dryer is pushing exhaust into a masonry chimney are high enough that we always check before we clean. And when we find what we expect, we show you the footage and tell you plainly whether the vent can be cleaned as-is or needs real repair first.
Contact Mantel Chimney Sweep in Los Angeles
If your dryer vent hasn’t been cleaned in over a year, or if you suspect it’s venting into an old chimney, call us at (844) 821-5749 for a free estimate. We serve all of Los Angeles, from 90004 to 90008 and the neighborhoods in between. Roland Vega and the rest of our crew will show up, camera the vent, and tell you exactly what you’re working with. No guesswork, no fear-selling. Just the right fix, done right.
Written by Roland Vega, Owner at Mantel Chimney Sweep, serving Los Angeles and the surrounding area.