Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Century City, CA
Chimney repair in Century City usually means working on a prefabricated gas fireplace or a decorative venting system inside a luxury high-rise, not a traditional brick stack. Mantel Chimney Sweep has served Century City since 2018, and most of what we do here involves diagnosing failing dampers, corroded fireboxes, and flue assemblies in 1960s-to-2000s condominium towers along Avenue of the Stars and Constellation Blvd. If your fireplace is drafting poorly, making noise, or setting off a CO detector, call (844) 821-5749 and we’ll walk you through what we’re likely to find before we ever book the job.
Why Century City Homes Are Different
Century City’s 90067 is almost entirely high-rise condos and office towers, which changes what chimney work looks like before anyone picks up a brush. Almost every fireplace here is a gas-log or gas-insert unit inside a prefabricated metal firebox. There is rarely a masonry flue running up the outside of the building. That means the job is less about climbing on a roof and more about working inside the mechanical chase, checking the direct-vent termination, and confirming the damper assembly still seals. Santa Ana winds push smoke and embers hard against high-rise vent terminations, and when a unit sits idle most of the year, small issues compound.
Building access is the other half of the job. Many of the towers around Century Plaza and the Avenue of the Stars corridor require certificate-of-insurance paperwork from the HOA before a technician can book a service elevator. Concierge desks need notice, loading docks have time windows, and nobody wants soot tracked across a marble lobby. We handle that coordination as part of the estimate, because in Century City the building approval is often the slowest step, not the repair itself.
Styles & brands we work with
Our Main Century City Services
Most Century City homeowners call us for one of two things: a fireplace that has started acting up, or a dryer vent that has not been touched since move-in. Here is how each works in this building stock.
Chimney Sweep in Century City
A Chimney Sweep in Century City typically means a gas fireplace cleaning and inspection rather than shoveling creosote out of a brick flue. The limited burn season means units sit idle for months, so the value is in the inspection: we check the gas log set, the pilot, the damper, and the termination cap for soot, rust, and Santa Ana wind damage. Spark arrestors on high-rise terminations are a specific fire-safety item here, and we clean them as part of the standard visit.
Dryer Vent Cleaning in Century City
Dryer Vent Cleaning in Century City addresses one of the most common household fire hazards in high-rise living. Laundry closets in older towers often have long, hidden vent runs with multiple bends, and lint packs into those turns where nobody can see it. We run professional rotary brushes through the full length, check the exterior termination, and document the before-and-after airflow. In condos, a clogged shared vent can affect more than one unit.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Century City
Chimney repair in Century City is almost always about restoring a prefabricated fireplace system rather than repointing brick. The original damper and flue assemblies in 1960s-era towers are now decades old, and we routinely find rusted dampers that no longer seal, cracked firebox panels, and corroded vent pipe that should have been replaced years ago. Because these systems sit idle most of the year, damage often goes unnoticed until the first cold night when the fireplace gets lit again. That is where Chimney Repair expertise matters: we diagnose the full vent path, not just the part you can see from the living room.
Chimney Cap Installation
Signs you need it
Water stains on the ceiling below the fireplace chase, a missing or rusted termination cap, or birds nesting in the vent opening.
What it costs in Century City
Chimney cap installation in Century City typically runs from $175 to $800 depending on the cap material, vent diameter, and whether we need a custom fit for a high-rise termination.
How we do it
We remove the old cap, measure the flue termination, select a stainless or galvanized replacement rated for Santa Ana wind exposure, and secure it with mechanical fasteners rated for high-rise locations.
Chimney Liner Installation
Signs you need it
Visible flue tile damage during a camera inspection, smoke entering other rooms, or a CO detector that activates when the fireplace runs.
What it costs in Century City
Chimney liner installation in Century City typically costs $2,200 to $4,500 for a gas fireplace vent reline, since the prefab metal chase is common here and full replacements run higher.
How we do it
We camera-scan the existing flue path, size the replacement to the vent diameter, install a stainless liner through the existing chase, and pressure-test the termination before recommissioning the unit.
What Chimney Repair Costs in Century City
| Item | Typical range in Century City |
|---|---|
| Chimney cap installation | $175 – $800 |
| Chimney liner installation | $2,200 – $4,500 |
| Flashing or crown repair (metal chase equivalent) | $300 – $1,100 |
What pushes price up in Century City is access. A service elevator time block, COI paperwork with a management company, and a loading-dock window all add coordination hours before the repair starts. We quote that labor as a separate, transparent line item so you know exactly what you are paying for.
How do I know if my Century City fireplace needs repair?
Look for rust on the firebox interior, a damper that will not fully close, soot streaks above the fireplace opening, or a pilot that keeps going out. Any of these is reason enough for a camera inspection, which is included in our repair estimates.
Can you repair a fireplace in a Century City condo without HOA approval?
Usually yes, if the repair stays within your unit’s vent assembly. If the work requires roof or termination access, the HOA will typically need a COI on file first. We can supply that paperwork before the visit, and we’ll tell you in advance which jobs will need board sign-off.
Brands We Service in Century City
We work with HeatShield cerfractory sealant, Olympia Chimney vent components, and Famco caps and terminations. Most common Century City parts are stocked and ready before we arrive, so a straightforward cap replacement or damper repair is usually one visit. See our brands for the full list of what we install and why.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Century City, CA
| Service | Typical range in Century City |
|---|---|
| Chimney sweep (gas fireplace) | $169 – $289 |
| Dryer vent cleaning | $110 – $235 |
| Chimney cap installation | $175 – $800 |
| Chimney cap replacement | $175 – $800 |
| Chimney liner installation | $2,200 – $4,500 |
| Chimney flashing repair | $300 – $800 |
| Chimney crown repair | $400 – $1,100 |
Century City pricing tends to run toward the middle and upper part of these ranges because of building access, service elevator scheduling, and COI processing time. Every estimate is a fixed, upfront price agreed before we book the job, and nothing gets added after the fact.
Neighborhoods We Serve in Century City
We cover all of 90067 and the immediately surrounding high-rise blocks. Response time for most Century City calls is within a few business days, with the real scheduling variable being the building’s service elevator and loading dock availability rather than our calendar.
- Century Plaza towers
- Avenue of the Stars corridor
- Constellation Blvd condominiums
- Century Woods
- Olympic Blvd high-rises
Service Area – Cities Near Century City
Mantel Chimney Sweep also serves the surrounding Westside. We work regularly in Beverly Hills, CA and Culver City, CA, where the housing stock shifts toward single-family homes with masonry chimneys. In West Hollywood, CA and Santa Monica, CA, we see a mix of older condos and newer construction, and the access challenges change accordingly.
Serving Century City, CA — Our Local Coverage Area
We’re based in the Century City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Century City
Most Century City visits are scheduled within three to five business days. The limiting factor is usually the building’s service elevator and COI approval process, not our availability. If your HOA already has our certificate of insurance on file, scheduling usually moves faster.
Repairs inside the fireplace chase and vent assembly typically do not need a city permit. Work that involves roof penetrations or structural changes may require building department review, and your HOA may have its own approval process. We will tell you before the estimate if permits are likely.
Yes. We provide COI documents, technician names, and a scope of work to your building management. In most Century City towers, once the paperwork is accepted, we book a service elevator window and coordinate through the loading dock so no equipment moves through common-area lobbies.
If your Century City fireplace needs repair, a cleaning, or an honest assessment, call Mantel Chimney Sweep at (844) 821-5749 for a free estimate. We’ll tell you what is wrong, what it costs, and whether it can wait. No scare tactics, no unnecessary liners.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Century City Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Eric Mercer"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Rachel Lawson"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Gilbert Garcia