Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Desert Hot Springs, CA
Chimney repair in Desert Hot Springs usually means one of three things: a cracked crown from decades of 40-degree temperature swings between day and night, a rusted-out cap packed with wind-driven sand, or a flue liner that has given up after years of intense creosote fires. Mantel Chimney Sweep handles all of it, from a basic cap replacement to a full DuraFlex liner installation. We work on the mid-century masonry fireplaces, the 1980s tract-home metal flues, and the manufactured-home systems that make up most of Desert Hot Springs. Call (844) 821-5749 when you need a repair that actually holds up to this climate.
Why Desert Hot Springs Homes Are Different
Desert Hot Springs sits directly over the Mission Creek branch of the San Andreas fault, and that geology shapes everything about how chimneys behave here. The town is a wind-whipped high-desert corridor where winter nights drop near freezing while summer afternoons push past 110°F. A chimney that sits idle from April through October still takes a beating, because the San Gorgonio Pass funnels sustained winds through town, driving fine sand into caps, spark arrestors, and flues all year long.
The housing stock spans mid-century ranch-style homes with masonry fireplaces, 1980s-2000s desert tract builds with factory-made metal flues, and a significant number of manufactured and mobile homes. Each type ages differently. Masonry fireboxes crack under the daily expansion and contraction cycle. Metal flues corrode where condensation meets desert dust. Manufactured-home chimneys are often shallow and need different inspection techniques than a full masonry stack. We have walked hundreds of rooftops around Desert Hot Springs, and the pattern is consistent: homes near the wind corridors need cap screens checked far more often than a typical Inland Empire house, simply because the sand never stops moving.
Styles & brands we work with
Our Main Desert Hot Springs Services
Most homeowners in Desert Hot Springs call us for one of two reasons: a chimney that has not been cleaned since before the last cold snap, or a dryer vent that is quietly packing desert lint into a fire hazard. Both are the kind of problem that builds silently, and both are fixable with the right equipment and a trained eye.
Chimney Sweep in Desert Hot Springs
A chimney sweep in Desert Hot Springs is rarely just about creosote. The wind coming through the pass pushes fine sand into chimney caps and flues all year, so a cleaning here often starts with removing inches of grit before we ever get to the combustion deposits. We also check for cracked masonry from the region’s daily temperature swings, because a flue that has shifted can vent into places it should not. If you have not had the chimney looked at since you bought the house, this is the call to make. Full details are on our Chimney Sweep in Desert Hot Springs page.
Dryer Vent Cleaning in Desert Hot Springs
Dryer vents in Desert Hot Springs work against a particular problem: homes are sealed tight against the heat, so a vent that is already slowed by lint has nowhere to pull makeup air from. That means longer dry times and a vent that runs hotter than it should. Clogged dryer vents are one of the top causes of residential fires nationwide, and Desert Hot Springs homes see exactly the same risk, made worse by desert dust mixing with lint into a dense mat. We clear the full run, not just the first few feet behind the dryer. See the Dryer Vent Cleaning in Desert Hot Springs page for what the job includes.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Desert Hot Springs
Most chimney repairs in Desert Hot Springs trace back to two things: wind-driven grit abrading masonry and metal components, and the wide day-to-night temperature swings that stress every joint in the system. A crown that looks fine in July may have hairline fractures by January, opened up by repeated expansion and contraction. Mantel Chimney Sweep had served Desert Hot Springs since 2018, and the repair jobs we see most are crown failures, rusted caps, and liners that are no longer safe to fire. When we find damage, we fix it, using professional-grade materials from suppliers like Olympia Chimney and HeatShield. We repair what others can only report. Learn more about our full Chimney Repair capability, or keep reading for the specific jobs we handle in Desert Hot Springs.
Chimney Cap Installation
Signs you need it
You see rust stains running down the chimney chase, find sand or grit inside the fireplace after a windstorm, or notice birds and insects getting into the flue.
What it costs in Desert Hot Springs
Chimney cap installation in Desert Hot Springs typically runs $150 to $350 depending on the cap material and flue size, with stainless steel caps at the higher end because they hold up better against blowing sand.
How we do it
We pull the old cap if one exists, verify the flue dimensions, then fit and mechanically fasten a stainless steel or galvanized cap sized for the specific flue tile or pipe, with a screen that blocks embers and wind-driven debris.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, the screen is torn or missing, or the cap has blown loose and is sitting crooked on the flue.
What it costs in Desert Hot Springs
Chimney cap replacement in Desert Hot Springs falls within the same $150 to $350 range as a new installation, with labor and materials bundled into one upfront price before we start.
How we do it
We remove the failed cap, inspect the flue opening for damage, and install a replacement cap that is rated for high-wind conditions like those along the San Gorgonio Pass corridor.
Chimney Liner Installation
Signs you need it
You see flue tile pieces in the firebox, smell smoke in rooms far from the fireplace, notice a white powdery residue on the exterior chimney wall, or your chimney professional has told you the flue is no longer safe to use.
What it costs in Desert Hot Springs
Chimney liner installation in Desert Hot Springs runs roughly $2,500 to $5,000 for a typical single-story home, with two-story installations and longer flue runs trending toward the upper end of that range.
How we do it
We take exact flue measurements, prepare the existing chimney with a thorough cleaning, then slide a DuraFlex flexible stainless steel liner down the flue, connect it to the appliance and a properly sized termination at the top, and verify the draft with the appliance running.
Chimney Flashing Repair
Signs you need it
Water stains appear on the ceiling near the fireplace or on the wall where the chimney passes through, and you see peeling caulk or lifted metal around the chimney where it meets the roofline.
What it costs in Desert Hot Springs
Chimney flashing repair in Desert Hot Springs typically costs $250 to $600, depending on how much of the existing flashing must be removed and whether the surrounding roofing deck is intact.
How we do it
We pull the old flashing and sealant, inspect the step and counter-flashing for damage, and install new flashing with a high-temperature rated sealant that handles Desert Hot Springs heat and wind-driven moisture.
Chimney Crown Repair
Signs you need it
The concrete or mortar crown on top of the chimney has visible cracks, chunks have fallen away, or water puddles on the crown after rain instead of draining off.
What it costs in Desert Hot Springs
Chimney crown repair in Desert Hot Springs runs $300 to $800 for typical repairs; a full crown rebuild with proper overhang and expansion properties costs more and is quoted based on the chimney’s footprint.
How we do it
We clean the existing crown, fill hairline cracks with a flexible crown sealant rated for high temperature swings, and rebuild badly deteriorated crowns with a proper concrete mix that includes a drip edge to shed water away from the brick.
What Chimney Repair Costs in Desert Hot Springs
| Item | Typical range in Desert Hot Springs |
|---|---|
| Chimney cap installation or replacement | $150 – $350 |
| Chimney flashing repair | $250 – $600 |
| Chimney crown repair | $300 – $800 |
Liner work is quoted per job, but a typical Desert Hot Springs liner installation runs $2,500 to $5,000. We give you the exact number before any work begins.
Do I really need a new liner, or can it be repaired?
Some liners can be restored with HeatShield cerfractory sealant, which bonds to the existing flue and restores a smooth, insulated surface. If the liner is severely cracked, offset, or spalling into the firebox, replacement with a DuraFlex stainless steel liner is safer. We show you camera footage of the flue so you can see exactly what we are seeing, and we never recommend a liner when the existing one can be safely restored.
How long does chimney repair take in Desert Hot Springs?
Cap replacements and flashing repairs are usually done in a single visit. Crown repairs need a return trip after the crown material cures. Liner installations typically take one full day for a single-story home. We schedule around the wind; high gusts can delay rooftop work for safety reasons, but it is rare for a repair to stretch past a few days.
Brands We Service in Desert Hot Springs
We work with a deliberate set of chimney-industry materials: HeatShield for flue liner restoration, Gelco and Olympia Chimney for caps and chase covers, and Famco for termination and venting components. We do not stock off-brand knockoffs. See our brands page for the full list. Turnaround on most parts is two to three business days in Desert Hot Springs.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Desert Hot Springs, CA
| Service | Typical range in Desert Hot Springs |
|---|---|
| Chimney Sweep | $150 – $250 |
| Dryer Vent Cleaning | $100 – $180 |
| Chimney Cap Installation | $150 – $350 |
| Chimney Cap Replacement | $150 – $350 |
| Chimney Flashing Repair | $250 – $600 |
| Chimney Crown Repair | $300 – $800 |
| Chimney Liner Installation | $2,500 – $5,000 |
What pushes a Desert Hot Springs price up is mostly height and access. Two-story roofs, steep pitches, chases that are boxed in by neighboring structures, and chimneys that are buried in sand drift all take longer to work safely. The price we give you before we start is the price you pay; we do not add surprise fees after the fact.
Neighborhoods We Serve in Desert Hot Springs
We work throughout Desert Hot Springs, from the older ranch-style streets near the center of town to the newer desert tracts pushing toward the wind corridors. Our techs know which parts of town see the heaviest sand buildup and which housing stock needs a closer crown inspection. We typically schedule Desert Hot Springs visits within one to two weeks, with flexibility for urgent safety issues before cold snaps.
- Desert Hot Springs Highlands
- Mission Lakes
- Skyborne
- Hacienda Heights
- Foxdale Estates
Service Area – Cities Near Desert Hot Springs
Mantel Chimney Sweep also covers the communities just beyond Desert Hot Springs, including Desert Edge, CA, Sky Valley, CA, Garnet, CA, and Thousand Palms, CA. If you are in one of those areas and need chimney repair, sweeping, or dryer vent cleaning, the same crew and the same upfront pricing apply.
Serving Desert Hot Springs, CA — Our Local Coverage Area
We’re based in the Desert Hot Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Desert Hot Springs
Once a year is the standard for wood-burning fireplaces, but if you burn during the short cold snaps and then let the chimney sit for months, an annual sweep before the first fire of the season is the right rhythm. Homes near the wind corridors may want a mid-season inspection because sand packs into caps quickly, even without fires.
Most chimney sweeping, cap replacement, and liner work falls under maintenance and does not require a permit, but we always verify local building department requirements before starting structural work. If you are in an HOA community, your HOA may have rules about exterior color or cap style, and we can help you confirm those before ordering parts.
Yes. Desert Hot Springs has a significant number of manufactured and mobile homes, and those systems need a different inspection approach than full masonry chimneys. We check the roof penetration, the listed chimney components, and the connection to the appliance. The same annual cleaning standard applies, and we stock the components to repair or replace what we find.
If your chimney or dryer vent needs attention in Desert Hot Springs, call Mantel Chimney Sweep at (844) 821-5749 for a free estimate. We will inspect the system, show you what we find, and give you an upfront price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Desert Hot Springs Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Gilbert Garcia"They were the only ones willing to just tell me the price. Everyone else wanted to "come take a look" first, which in my experience means come apply pressure in person."
— Matt Delaney"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Diego Delgado