Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Fontana, CA
Mantel Chimney Sweep handles chimney repair in Fontana with a focus on the housing stock that defines this city: thousands of 1950s through 1970s tract homes built for Kaiser Steel workers and Route 66-era families. Most of those original masonry fireplaces are still in service, and their clay-tile flues are now six to seven decades old. That means our repair work in Fontana starts with crack inspection and flue-tile assessment before we ever recommend a sweeping schedule. Call (844) 821-5749 when you want a straight answer about whether your chimney can safely wait another season.
Why Fontana Homes Are Different
Fontana sits in the hot, dry Inland Empire where Santa Ana wind events push debris, dust, and dried leaves into chimney caps and flues from October through March. Fireplaces here sit unused for months during long hot seasons, which means creosote and soot loads build up quietly. By the first cold snap, we routinely find blockages that have been forming since spring. The dry climate does something else too: it makes flue-tile cracking and mortar deterioration more visible, which is useful, but it also accelerates those cracks once they start. A hairline fracture in a clay tile will widen faster in Fontana’s zero-humidity summers than it would in a coastal city. In the older central and southern ZIP codes like 92335 and 92337, decades of dry heat and Santa Ana winds have left many chimneys with loose or missing spark-arrestor caps, cracked flue tiles, and bird or rodent nests that only surface once the first cool-weather cleaning is booked. Newer north-side development in 92336 has more 1990s and 2000s two-story homes with factory-built fireplaces and metal flues, which call for different techniques entirely. Knowing which you have is the first diagnostic step.
Styles & brands we work with
Our Main Fontana Services
Fontana homeowners call us most often for two jobs: a full chimney sweep on an older masonry fireplace, or a dryer vent cleaning on a home where the laundry room vents into the attic or out a side wall that hasn’t been touched in years.
Chimney Sweep in Fontana
A thorough sweep in Fontana means more than brushing soot off the flue walls. We inspect the clay tiles for cracks, check the spark-arrestor cap for damage from years of Santa Ana wind, and look for nests that rodents and birds build during the months when the fireplace sits cold. In older 92335 and 92337 homes, it’s common to find the original 1950s cap rusted through or missing entirely. We document everything with a camera inspection so you see what we see. For more detail on how a Fontana sweep works, see our Chimney Sweep in Fontana page.
Dryer Vent Cleaning in Fontana
Clogged dryer vents are one of the leading causes of residential fires in the Inland Empire, and Fontana’s dry air makes lint buildup especially flammable once it starts. Many older ranch homes here have long vent runs or terminations at awkward angles that collect lint faster than homeowners expect. We clean the full run, clear blockages, and confirm airflow at the exterior termination. For the full scope of this service, see Dryer Vent Cleaning in Fontana.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Fontana
Chimney repair in Fontana is as much about assessing aging masonry and flue-tile integrity as it is about cleaning. The city’s original Kaiser Steel-era tract homes were built with clay-tile flues that have now withstood sixty-plus years of Inland Empire heat, Santa Ana wind, and occasional seismic movement. Those tiles crack, mortar joints erode, and crowns spall. We repair what others can only report: cracked flues, failed flashing, missing caps, and deteriorated crowns. Every repair recommendation comes with camera evidence you can see yourself, and we tell you plainly when work can safely wait. Mantel Chimney Sweep has served Fontana since 2018, and our repair work uses materials from Olympia Chimney, Famco, and Copperfield. For the full scope of repair services, see Chimney Repair.
Chimney Cap Installation
Signs you need it
You can see daylight through the top of your flue with no cap, or you’ve noticed bird activity, debris falling into the firebox, or water streaks on the interior flue walls after rain.
What it costs in Fontana
Chimney cap installation in Fontana typically runs $180 to $450 depending on the cap style and the flue size.
How we do it
We measure the flue opening, prepare the crown surface, and install a stainless or copper cap with a spark-arrestor screen sized correctly for your tile or metal flue.
Chimney Liner Installation
Signs you need it
Camera inspection shows cracked, spalled, or missing clay tiles, or you’ve had a chimney fire and the flue walls are compromised.
What it costs in Fontana
Chimney liner installation in Fontana generally falls between $2,200 and $4,500 for a DuraFlex stainless steel liner system sized to your flue and appliance.
How we do it
We run a camera inspection to confirm dimensions, then install a DuraFlex flexible stainless liner from the appliance or firebox up through the entire flue, connected to a properly sized cap and termination.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the chimney, damp drywall around the firebox, or exterior rust and lifted flashing at the roofline.
What it costs in Fontana
Chimney flashing repair in Fontana runs $495 to $1,250 depending on how much flashing is deteriorated and whether roof access requires additional equipment.
How we do it
We remove the failed flashing, inspect the surrounding roof deck and chimney masonry, then install new step and counter flashing sealed for Fontana’s dry heat and wind exposure.
Chimney Crown Repair
Signs you need it
The concrete crown has visible cracks, spalling, or missing chunks, and water pools on top of the chimney after rain.
What it costs in Fontana
Chimney crown repair in Fontana ranges from $600 to $1,800 depending on whether we’re sealing minor cracks or rebuilding the entire crown with proper overhang and drainage slope.
How we do it
We assess crack depth, remove deteriorated material, and rebuild or seal the crown so water sheds away from the flue rather than seeping into the masonry below.
What Chimney Repair Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| Chimney cap installation | $180 – $450 |
| Chimney flashing repair | $495 – $1,250 |
| Chimney liner installation | $2,200 – $4,500 |
How do I know if my Fontana chimney needs a new liner?
A camera inspection shows cracked or missing clay tiles, or you’ve had a chimney fire. In older Fontana tract homes, tile deterioration after sixty years is common. We only recommend a liner when the camera footage shows it’s necessary.
Can a cracked chimney crown wait until spring in Fontana?
Sometimes, yes. Minor cracks can wait if there’s no active water intrusion. But Fontana’s dry heat then winter rain cycles widen cracks quickly. We’ll show you the camera evidence and give you an honest timeline. Call (844) 821-5749 for an assessment.
Brands We Service in Fontana
Our Fontana repair work uses DuraFlex stainless steel liner systems, Olympia Chimney caps, and Copperfield flashing components. We stock common sizes locally, which keeps most repair jobs on a single visit. For the full list of what we service, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Chimney sweeping (standard) | $198 – $360 |
| Chimney sweep with inspection | $250 – $400 |
| Chimney cap installation | $180 – $450 |
| Chimney cap replacement | $180 – $450 |
| Chimney flashing repair | $495 – $1,250 |
| Chimney crown repair | $600 – $1,800 |
| Chimney liner installation | $2,200 – $4,500 |
| Dryer vent cleaning | $125 – $300 |
Prices in Fontana push toward the upper end of those ranges when a chimney hasn’t been opened in five or more years, when animal nests need removal before cleaning can start, or when the flue is an unusual size on an older 1950s ranch. We quote a flat price before the work begins, after a camera inspection, so nothing changes mid-job.
Neighborhoods We Serve in Fontana
We work across Fontana’s older central tracts, the mid-century neighborhoods built during the Kaiser Steel boom, and the newer north-side developments. Most Fontana jobs can be scheduled within three to five business days.
- Downtown Fontana (92335)
- Southridge (92337)
- North Fontana (92336)
- Sierra Lakes (92336)
- Summit Heights (92337)
Service Area – Cities Near Fontana
Mantel Chimney Sweep serves Fontana and the surrounding Inland Empire communities. If you’re in a neighboring city, we can often schedule your chimney or dryer vent service on the same route. Bloomington, CA sits just west of Fontana, while Rialto, CA is directly north. Glen Avon, CA and Pedley, CA are also within our regular service area.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Fontana
Most Fontana addresses can be scheduled within three to five business days. During the first cool snap in October and November, demand picks up quickly, so booking before the first fire of the season is the better move. Call (844) 821-5749 to check our current availability.
For most single-family Fontana homes, chimney sweeping and repair work does not require HOA approval or a city permit. Exterior liner or crown work is considered routine maintenance. If you’re in a planned community with strict architectural guidelines, check your CC&Rs, but we’ve rarely seen pushback on safety-related chimney repair.
We cover all Fontana ZIP codes including 92335, 92336, 92337, and 92331, plus nearby cities like Bloomington, Rialto, Glen Avon, and Pedley. If you’re unsure whether you’re in range, call (844) 821-5749 with your cross streets and we’ll confirm.
If your Fontana chimney needs a sweep, a liner assessment, or a repair that actually fixes the problem, call Mantel Chimney Sweep at (844) 821-5749. We’ll get you a camera inspection and a flat-price quote before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Gilbert Garcia"They were the only ones willing to just tell me the price. Everyone else wanted to "come take a look" first, which in my experience means come apply pressure in person."
— Matt Delaney"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Diego Delgado