Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Century City
Dryer vent cleaning in Century City typically costs $165 – $285 for a condo unit, depending on chase length and whether your building requires documents before we can start. Most jobs take 60 – 90 minutes once we’re through the service elevator. If your dryer takes two cycles to dry a load, the problem is almost never the machine. In 90067, it’s usually a long duct run packed with lint somewhere you can’t see. Call (844) 821-5749 and we’ll walk you through what we check before quoting anything.
We know Century City buildings. We know the loading docks off Constellation, the concierge desks on Avenue of the Stars, the HOA coordinators at Century Plaza towers. That matters because a dryer vent job here isn’t like a single-family home in Culver City where the duct punches straight through an exterior wall. More on that below.
Why Mantel Chimney Sweep Is Century City’s Preferred Dryer Vent Cleaning Company
Mantel Chimney Sweep is led by Roland Vega, who built the company around one idea: do the job right the first time, and show the homeowner proof before recommending anything else. Our Dryer Vent Cleaning team handles the long chase ducts and shared risers that define Century City’s high-rise stock. That’s not a sideline for us. It’s the core of what we do alongside chimney sweeping and repair.
Century City customers call us for the same reasons. We show camera footage of the duct before and after. We test airflow at the exterior termination, not just at the dryer. We know which towers off Avenue of the Stars store the roof access keys with engineering, and which want a COI filed with the board office on Constellation before anyone books the service elevator. That coordination is part of the job, not an add-on.
Roland Vega personally reviews every job report that involves a recommendation for repair or replacement. If the footage doesn’t show a problem, we don’t invent one. That’s why building managers and homeowners keep our number on file.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Century City
Full Dryer Vent and Transition Duct Cleaning with Camera Verification
We clean the entire run from the dryer connection to the exterior termination. In Century City condos, that run often travels 20 to 40 feet through a shared chase. We use rotary tooling to break up felted lint blankets and run a camera before and after so you see exactly what was blocking airflow. No camera footage, no recommendation. That’s our rule.
Exterior Termination, Cap, and Flapper Inspection
City code and good sense require an exterior cap and flapper on every dryer vent termination. In a high-rise off Constellation Blvd, that termination may be on a rooftop or a sidewall 15 stories up. We inspect it, clear debris, and confirm the flapper opens and seals. If the HOA needs a COI before granting roof access, we provide it before the visit.
Airflow Testing Before and After Service
We measure airflow at the dryer connection before we start and after we finish. A Century City unit with a 30-foot chase run should move a specific volume of air. If the numbers don’t improve after cleaning, we’ll show you the camera evidence and tell you what’s actually needed. Sometimes it’s a crushed transition duct. Sometimes it’s a chase duct that was never sized right. We’ll show you rather than tell you to trust us.
Laundry Closet and Transition Duct Assessment
That flexible foil transition duct behind your stacked washer and dryer? In a 1960s tower off Avenue of the Stars, it gets crushed between the appliance and the wall more often than homeowners realize. We inspect that section on every visit. A crushed transition can cut airflow by half even when the main chase is spotless. We fixed one just last month where the dryer ran two cycles per load and the laundry closet smelled hot.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Century City
We work on all major dryer makes and vent configurations, and when a chase duct needs repair or a cap replacement, we use parts from professional supply lines like Gelco and Olympia Chimney. That matters because cheap hardware-store caps fail in the Westside sun and Santa Ana winds. Our Dryer Vent Cleaning technicians carry common Century City sizes on the truck so a simple cap replacement doesn’t require a second visit. For bigger jobs, we coordinate delivery through your building’s loading dock and service elevator, because nobody wants soot or lint tracked through a marble lobby.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Century City Homes
- Long chase runs that hide lint buildup. Because 90067 is almost entirely high-rise condos, a Century City dryer vent run is usually a long rigid or semi-rigid duct snaking through a shared chase to a rooftop or sidewall termination. Lint rarely packs where a homeowner can reach it, so the first visible symptom is slow drying, not a clogged screen.
- Crushed flex transition duct behind stacked laundry units. In a tight condo closet, the flexible foil transition gets pushed against the wall when the washer or dryer shifts. Airflow drops, the dryer overheats, and the heating element wears out early. We check this on every job.
- Missing or stuck exterior flapper. A flapper that won’t open traps moist air inside the duct. A flapper that won’t close lets birds and outside air in. On a high-rise, that flapper might be 100 feet from the dryer, so nobody notices until the vent backs up or a bird nests inside.
- HOA and building access delays that postpone cleaning for years. Some residents wait months because the board requires a certificate of insurance before any vendor can access the roof or use the service elevator. We handle that paperwork up front. If the board has a form, we complete it. If they need a COI, we send it the same day.
In a 1960s tower off Avenue of the Stars, a homeowner called us because the dryer took two cycles to dry a load and the laundry closet smelled hot. Our tech found the flexible transition crushed behind the unit and the long chase duct packed with a felted lint blanket. We pulled it with rotary tooling and verified airflow at the exterior termination before leaving. Then we showed the homeowner the camera footage of the chase and the recovered lint. That’s the standard for every job in Century City.
Pricing for Dryer Vent Cleaning in Century City, CA
A standard dryer vent cleaning in a Century City condo runs $165 – $285. What moves the price:
- Access type. Service elevator and loading dock coordination are standard in 90067 and usually don’t add cost, but buildings that require a security escort or after-hours access may add $40 – $75.
- Chase length. A 10-foot run in a ground-floor unit costs less than a 35-foot shared chase to a roof termination. The longer the run, the more time we spend on rotary cleaning and camera work.
- Exterior cap condition. If the cap or flapper is damaged or missing, replacement parts from Gelco or Olympia Chimney typically run $30 – $90 depending on size.
- Transition duct replacement. Crushed or torn foil flex is unsafe and should be replaced. We carry rigid and semi-rigid transitions on the truck, so this is a same-visit fix, usually $25 – $50 in parts.
You’ll get a firm price before we start, after we see the access situation and the vent location. Call (844) 821-5749 for a free estimate. We won’t recommend anything without showing you the camera footage first.
We Also Serve Cities Near Century City
Our Dryer Vent Cleaning in Century City team regularly handles jobs in Beverly Hills, Culver City, West Hollywood, and Santa Monica. High-rise access, HOA paperwork, and long chase runs aren’t unique to 90067, and we bring the same camera-verified standard everywhere in the Westside. If you’re just outside Century City, call us and we’ll schedule around your building’s access windows.
Serving Century City, CA — Our Local Coverage Area
We’re based in the HeatShield in Century City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Century City
Yes. We clean the entire duct from the dryer connection to the exterior termination, including the section inside the shared chase. In a high-rise off Avenue of the Stars, that’s usually a long rigid or semi-rigid duct we reach with rotary tooling from one end and a camera from the other. We verify airflow at the exterior cap when access allows. If the chase has a mid-run cleanout, we’ll use it. If not, we work from the laundry closet and the termination. You’ll see before-and-after camera footage of the whole run. Call (844) 821-5749 and we’ll explain how we’d access your specific unit.
Many Century City condos and towers do require a COI, especially when we need roof access or must submit paperwork to a concierge desk on Constellation Blvd. We provide certificates of insurance on request, usually same day. If your HOA board has a specific vendor form, we complete that before the visit. Tell us who to send it to and we’ll handle it. Call (844) 821-5749 and we’ll walk you through what your building needs.
Because the blockage is almost never in the lint screen. In a Century City unit, the vent run is usually long and hidden inside a shared chase, where lint packs against duct walls and reduces airflow long before it clogs the screen. A crushed transition duct behind the washer or a stuck exterior flapper causes the same symptom. The fix starts with a camera inspection of the entire run, not just the section behind the dryer. Call (844) 821-5749 for a diagnosis based on footage, not guesswork.
Yes, when building management grants access to the termination point. On a Century City tower, the termination may be on a roof or a high sidewall off Constellation Blvd. We coordinate with your HOA, file any required COI, and use the service elevator to reach the roof or exterior. If access is denied, we’ll tell you what we couldn’t inspect and why that matters, and we’ll provide your board with a written recommendation. Call (844) 821-5749 and we’ll help you request the access.
Yes, in three concrete ways. The vent run is usually much longer and hidden in a shared chase, so we bring camera and rotary equipment built for 20-to-40-foot runs. Access requires coordination with a concierge desk, HOA board, and service elevator, which we handle for you. And the exterior termination often sits on a roof or high sidewall, so we verify airflow and cap condition at a point you’ll probably never see yourself. None of that applies to a single-family home in Culver City. Call (844) 821-5749 and we’ll walk you through what your building’s layout means for your vent.
Written by Roland Vega, Owner at Mantel Chimney Sweep, serving Century City and the Westside.